Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PTFE FL4530-NC SABIC INNOVATIVE US
LNP™ LUBRICOMP™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/FL4530-NC |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 80 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 6.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/FL4530-NC |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 900 Mpa | |
| tensile strength | 屈服 | ISO 527-2/50 | 20.0 Mpa |
| bending strength | ISO 178 | 18.0 Mpa | |
| Flexural modulus | ISO 178 | 700 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 12 % |
| 屈服 | ISO 527-2/50 | 9.0 % | |
| tensile strength | 断裂 | ISO 527-2/50 | 12.0 Mpa |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/FL4530-NC |
|---|---|---|---|
| Shrinkage rate | MD | 内部方法 | 3.0 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/FL4530-NC |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Bf | 63.0 °C |
| Linear coefficient of thermal expansion | TD:23到60°C | ISO 11359-2 | 1.2E-04 cm/cm/°C |
| MD:23到60°C | ISO 11359-2 | 1.4E-04 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Af | 47.0 °C |
Contact Us
Get App
Top