Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.70to1.85 g/cm³ |
| Shrinkage rate | | | 0.15to0.35 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 14000 MPa |
| tensile strength | | ASTMD638 | 31.0 MPa |
| Flexural modulus | | ASTMD790 | 9700 MPa |
| bending strength | | ASTMD790 | 95.0 MPa |
| Poisson's ratio | | | 0.30 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 370 J/m |
| Impact strength of cantilever beam gap | | ASTMD256 | 480 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | 15 kV/mm |
| arc resistance | | ASTMD495 | 180 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | | 3.5E-05 cm/cm/°C |
| thermal conductivity | | | 0.30 W/m/K |
| RTI Elec | | UL746 | 130 °C |
| RTI Imp | | UL746 | 130 °C |
| RTI Str | | UL746 | 130 °C |
| | | 2.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare