Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Thermoset Premi-Ject® 110V-15 USA Premix
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | USA Premix/Premi-Ject® 110V-15 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 480 J/m |
| Mechanical properties | Test Condition | Test Method | USA Premix/Premi-Ject® 110V-15 |
|---|---|---|---|
| tensile strength | ASTM D638 | 31.0 MPa | |
| Tensile modulus | ASTM D638 | 14000 MPa | |
| Flexural modulus | ASTM D790 | 9700 MPa | |
| bending strength | ASTM D790 | 95.0 MPa | |
| Poisson's ratio | 0.30 |
| Electrical performance | Test Condition | Test Method | USA Premix/Premi-Ject® 110V-15 |
|---|---|---|---|
| dielectric strength | ASTM D149 | 15 kV/mm | |
| arc resistance | ASTM D495 | 180 sec |
| flammability | Test Condition | Test Method | USA Premix/Premi-Ject® 110V-15 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | USA Premix/Premi-Ject® 110V-15 |
|---|---|---|---|
| Shrinkage rate | MD | 0.15to0.35 % | |
| density | ASTM D792 | 1.70to1.85 g/cm³ |
| Thermal performance | Test Condition | Test Method | USA Premix/Premi-Ject® 110V-15 |
|---|---|---|---|
| thermal conductivity | 0.30 W/m/K | ||
| Linear coefficient of thermal expansion | MD2 | 2.5E-05 cm/cm/°C | |
| RTI Imp | UL 746 | 130 °C | |
| RTI Str | UL 746 | 130 °C | |
| Linear coefficient of thermal expansion | TD3 | 3.5E-05 cm/cm/°C | |
| RTI Elec | UL 746 | 130 °C |
Contact Us
Get App
Top