HIPS S834
0
- Properties:High gloss impact resistanceparticularly high impact strengthand good glossiness
- Usages:Injection molded products
CompareTechnical Data Sheet
| processability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 0.4-0.7 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| relative density | 1.04 | ||
| melt mass-flow rate | 4.0 g/min | ||
| Water absorption rate | 0.05 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | 63 | ||
| elongation | 50 % | ||
| bending strength | 52.0 MPa | ||
| tensile strength | 28.0 MPa | ||
| Lzod impact strength | 0.201 KJ/m | ||
| 2400 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | 2.5 | ||
| Volume resistivity | 10 Ω.CM |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | 96 °C | ||
| combustibility | UL 94 | HB | |
| 79 °C | |||
| vicat | 86 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top