Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HIPS S834 Korea East
--
Injection molded products
High gloss impact resistance, particularly high impact strength, and good glossiness
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Korea East/S834 |
|---|---|---|---|
| Water absorption rate | 0.05 % | ||
| melt mass-flow rate | 4.0 g/min | ||
| density | 1.04 |
| Mechanical properties | Test Condition | Test Method | Korea East/S834 |
|---|---|---|---|
| elongation | 50 % | ||
| Rockwell hardness | 63 | ||
| tensile strength | 28.0 MPa | ||
| bending strength | 52.0 MPa | ||
| Impact strength of cantilever beam gap | 0.201 KJ/m | ||
| Flexural modulus | 2400 MPa |
| Electrical performance | Test Condition | Test Method | Korea East/S834 |
|---|---|---|---|
| Volume resistivity | 10 Ω.CM | ||
| dielectric constant | 2.5 |
| processability | Test Condition | Test Method | Korea East/S834 |
|---|---|---|---|
| Shrinkage rate | 0.4-0.7 % |
| Thermal performance | Test Condition | Test Method | Korea East/S834 |
|---|---|---|---|
| Heat distortion temperature | HDT | 79 °C | |
| vicat | 49N | 86 °C | |
| combustibility | UL 94 | HB | |
| vicat | 9.8N | 96 °C |
Contact Us
Get App
Top