PEEK LNP™ LUBRICOMP™ LL004C SABIC INNOVATIVE US
113
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTMD570 | 0.060 % | |
| Shrinkage rate | ASTMD955 | 1.3 % | |
| ASTMD955 | 1.9 % | ||
| ISO294-4 | 1.9 % | ||
| ISO294-4 | 1.3 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UnnotchedIzodImpactStrength3 | ISO180/1U | 91 kJ/m² | |
| Dart impact equipped with measuring instruments | ASTMD3763 | 3.00 J | |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 1.00 J | |
| Suspended wall beam gap impact strength 3 | ISO180/1A | 8.8 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 2900 Mpa | |
| ISO527-2/1 | 3070 Mpa | ||
| tensile strength | ASTMD638 | 74.5 Mpa | |
| Tensile stress | ISO527-2 | 73.0 Mpa | |
| tensile strength | ASTMD638 | 69.6 Mpa | |
| Tensile stress | ISO527-2 | 69.0 Mpa | |
| elongation | ASTMD638 | 5.8 % | |
| Tensile strain | ISO527-2 | 5.0 % | |
| elongation | ASTMD638 | 23 % | |
| Tensile strain | ISO527-2 | 12 % | |
| Flexural modulus | ASTMD790 | 2960 Mpa | |
| ISO178 | 3320 Mpa | ||
| bending strength | ASTMD790 | 117 Mpa | |
| Bending stress | ISO178 | 118 Mpa | |
| ASTMD3702Modified | 0.52 | ||
| ASTMD3702Modified | 0.43 | ||
| Wear factor - Washer | ASTMD3702Modified | 128 10^-10in^5-min/ft-lb-hr |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top