Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK LL004C SABIC INNOVATIVE US
LNP™ LUBRICOMP™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/LL004C |
|---|---|---|---|
| Suspended wall beam gap impact strength 3 | 23°C | ISO180/1A | 8.8 kJ/m² |
| UnnotchedIzodImpactStrength3 | 23°C | ISO180/1U | 91 kJ/m² |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 1.00 J | |
| Dart impact equipped with measuring instruments | 23°C,EnergyatPeakLoad | ASTMD3763 | 3.00 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/LL004C |
|---|---|---|---|
| elongation | 断裂 | ASTMD638 | 23 % |
| Flexural modulus | ASTMD790 | 2960 Mpa | |
| Tensile stress | 屈服 | ISO527-2 | 73.0 Mpa |
| Bending stress | ISO178 | 118 Mpa | |
| Dynamic | ASTMD3702Modified | 0.52 | |
| Tensile modulus | ASTMD638 | 2900 Mpa | |
| bending strength | ASTMD790 | 117 Mpa | |
| Tensile strain | 断裂 | ISO527-2 | 12 % |
| Static | ASTMD3702Modified | 0.43 | |
| Tensile stress | 断裂 | ISO527-2 | 69.0 Mpa |
| elongation | 屈服 | ASTMD638 | 5.8 % |
| Tensile modulus | ISO527-2/1 | 3070 Mpa | |
| tensile strength | 屈服 | ASTMD638 | 74.5 Mpa |
| Tensile strain | 屈服 | ISO527-2 | 5.0 % |
| tensile strength | 断裂 | ASTMD638 | 69.6 Mpa |
| Flexural modulus | ISO178 | 3320 Mpa | |
| Wear factor - Washer | ASTMD3702Modified | 128 10^-10in^5-min/ft-lb-hr |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/LL004C |
|---|---|---|---|
| Shrinkage rate | TD：24hr | ASTMD955 | 1.9 % |
| MD:24小时 | ISO294-4 | 1.3 % | |
| TD:24小时 | ISO294-4 | 1.9 % | |
| Water absorption rate | 24hr,50%RH | ASTMD570 | 0.060 % |
| Shrinkage rate | MD：24小时 | ASTMD955 | 1.3 % |
Contact Us
Get App
Top