ASA+PC SCANBLEND FS8 UV4
0
- Properties:physical property
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| density | ISO 1183 | 1.17 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 20 g/10min | |
| Shrinkage rate | ISO 294-4 | 0.50to0.70 % | |
| ISO 294-4 | 0.50to0.70 % | ||
| tensile strength | ISO 527-2 | 50.0 MPa | |
| Tensile strain | Yield | ISO 527-2 | 7.0 % |
| Flexural modulus | ISO 178 | 2500 MPa | |
| bending strength | ISO 178 | 85.0 MPa | |
| Charpy Notched Impact Strength | ISO 179 | 50 kJ/m² | |
| Heat distortion temperature | ISO 75-2/B | 132 °C | |
| ISO 75-2/A | 122 °C | ||
| vicat | ISO 306/B50 | 134 °C | |
| UL flame retardant rating | UL 94 | HB | |
| Hot filament ignition temperature | IEC 60695-2-13 | 650 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top