TPX TPX™ DX820
41
- Properties:High temperature resistantransparent
- Usages:Medical packagingBottle cap
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting point | MCI方法 | 240 °C | |
| melt mass-flow rate | ASTM D-1238 | 180 g/10min |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ambiguity | ASTM D-1746 | --- % | |
| transmittance | ASTM D-1746 | --- % | |
| refractive index | ASTM D-542 | --- ND |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy notch impact strength | ASTM D-256 | --- kgcm/cm | |
| ROCKWELL hardness | ASTM D-785 | R80 | |
| Non notched LZOD impact strength | ASTM D-256 | --- kgcm/cm | |
| Tortuous modulus | ASTM D-790 | 13,000 kg/cm | |
| elongation | ASTM D-638 | 20 % | |
| Olsen rigidity | ASTM D-747 | 8,800 kg/cm | |
| tensile strength | ASTM D-638 | 175 kg/cm | |
| Tensile yield strength | ASTM D-638 | 230 kg/cm | |
| ASTM D-790 | 360 kg/cm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.01 % | |
| volume resistivity | ASTM D-257 | >10 Ωcm | |
| dielectric strength | ASTM D-149 | 65 KV/mm | |
| dielectric constant | ASTM D-150 | 2.12 | |
| Dielectric dissipation factor | ASTM D-150 | 0.0012 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate of mold | MCI方法 | --- % | |
| burning rate | ASTM D-635 | 2.54 cm/min | |
| linear expansion coefficient | ASTM D-696 | 1.17*10 1/℃ | |
| specific heat | ASTM C-351 | 0.47 cal/g℃ | |
| ASTM BS-847A | 4*10 calcm/seccm | ||
| ASTM D-648 | --- °C | ||
| Vicat softening point | ASTM D-1525 | 173 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top