Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPX DX820 MITSUI CHEM JAPAN
TPX™
Medical packaging、Bottle cap
High temperature resistan、transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | MITSUI CHEM JAPAN/DX820 |
|---|---|---|---|
| refractive index | ASTM D-542 | --- ND | |
| transmittance | ASTM D-1746 | --- % | |
| ambiguity | ASTM D-1746 | --- % |
| Electrical performance | Test Condition | Test Method | MITSUI CHEM JAPAN/DX820 |
|---|---|---|---|
| dielectric constant | 100～1MHz | ASTM D-150 | 2.12 |
| Dielectric dissipation factor | 23℃,1MHz | ASTM D-150 | 0.0012 |
| Water absorption rate | ASTM D-570 | 0.01 % | |
| Volume resistivity | ASTM D-257 | >10 Ωcm | |
| dielectric strength | ASTM D-149 | 65 KV/mm |
| Mechanical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/DX820 |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D-638 | 230 kg/cm |
| elongation | 断裂 | ASTM D-638 | 20 % |
| Suspended wall beam without notch impact strength | ASTM D-256 | --- kgcm/cm | |
| Charpy Notched Impact Strength | ASTM D-256 | --- kgcm/cm | |
| Olsen rigidity | ASTM D-747 | 8.800 kg/cm | |
| tensile strength | ASTM D-638 | 175 kg/cm | |
| Flexural modulus | ASTM D-790 | 13.000 kg/cm | |
| Rockwell hardness | ASTM D-785 | R80 | |
| bending strength | ASTM D-790 | 360 kg/cm |
| physical property | Test Condition | Test Method | MITSUI CHEM JAPAN/DX820 |
|---|---|---|---|
| melt mass-flow rate | 260℃,5kg | ASTM D-1238 | 180 g/10min |
| melting temperature | MCI方法 | 240 °C |
| Thermal performance | Test Condition | Test Method | MITSUI CHEM JAPAN/DX820 |
|---|---|---|---|
| vicat | ASTM D-1525 | 173 °C | |
| Linear coefficient of thermal expansion | ASTM D-696 | 1.17*10 1/℃ | |
| Shrinkage rate | 机械/垂直方向 | MCI方法 | --- % |
| specific heat | ASTM C-351 | 0.47 cal/g℃ | |
| thermal conductivity | ASTM BS-847A | 4*10 calcm/seccm | |
| Heat distortion temperature | 4.6kg/cm，HDT | ASTM D-648 | --- °C |
| burning rate | ASTM D-635 | 2.54 cm/min |
Contact Us
Get App
Top