Technical Data Sheet
thermosetting | Test Condition | Test Method | Test Result |
---|
STORAGE STABILITY | | | 30 min |
Thermosetting mixed viscosity | | ASTM D2393 | 1500 cP |
STORAGE STABILITY | | ASTM D2471 | 18 min |
stripping time | | | 960 min |
STORAGE STABILITY | | | 30 min |
Thermosetting mixed viscosity | | ASTM D2393 | 2000 cP |
stripping time | | | 960 min |
stripping time | | | 960 min |
STORAGE STABILITY | | | 20 min |
stripping time | | | 960 min |
physical property | Test Condition | Test Method | Test Result |
---|
Shrinkage rate | | ASTM D955 | <0.10 % |
Viscosity | | ASTM D2393 | Brushable |
density | | ASTM D1475 | 1.02 g/cm³ |
Specific volume | | ASTM D1475 | 0.975 cm³/g |
Shrinkage rate | | ASTM D2566 | <0.10 % |
Viscosity | | ASTM D2393 | Brushable |
density | | ASTM D1475 | 1.03 g/cm³ |
Specific volume | | | 0.972 cm³/g |
Shrinkage rate | | ASTM D955 | <0.10 % |
density | | ASTM D1475 | 1.02 g/cm³ |
Specific volume | | | 0.983 cm³/g |
Shrinkage rate | | ASTM D955 | <0.010 % |
density | | ASTM D1475 | 1.17 g/cm³ |
Specific volume | | | 0.856 cm³/g |
hardness | Test Condition | Test Method | Test Result |
---|
Shore hardness | Shore A | ASTM D2240 | 40 |
Shore hardness | Shore A | ASTM D2240 | 40 |
Shore hardness | Shore A | ASTM D2240 | 40 |
Shore hardness | Shore A | ASTM D2240 | 40 |
Supplementary Information | Test Condition | Test Method | Test Result |
---|
Mixing Ratio | | | 1:1byvolume1:1byweight |
Mixing Ratio | | | 1:1byvolume1:1byweight |
Mixing Ratio | | | 1A:1Bbyvolume100A:85Bbyweight |
Mixing Ratio | | | 1A:1Bbyvolume100A:125Bbyweight |
elastomer | Test Condition | Test Method | Test Result |
---|
tear strength | | ASTM D624 | 14.9 kN/m |
tensile strength | Break | ASTM D412 | 2.90 MPa |
elongation | Break | ASTM D412 | 580 % |
tear strength | | ASTM D624 | 11.7 kN/m |
tensile strength | | ASTM D412 | 0.689 MPa |
tensile strength | Break | ASTM D412 | 3.60 MPa |
elongation | Break | ASTM D412 | 660 % |
tear strength | | ASTM D624 | 14.4 kN/m |
tensile strength | | ASTM D412 | 0.503 MPa |
tensile strength | Break | ASTM D412 | 3.38 MPa |
elongation | Break | ASTM D412 | 1000 % |
tensile strength | Break | ASTM D412 | 2.07 MPa |
elongation | Break | ASTM D412 | 1000 % |
tear strength | | ASTM D624 | 10.5 kN/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.