HDPE HGB-0454
0
- Usages:film
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| EnvironmentalStress-CrackingResistance | ASTMD1693B | 60.0 hr | |
| density | ASTMD1505 | 0.954 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 0.30 g/10min |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| BlowMoldingMoldTemperature | 10to30 °C | ||
| Blow molding temperature | 160to180 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTMD638 | 27.0 MPa | |
| Tensile strain | ASTMD638 | 1000 % | |
| Flexural modulus | ASTMD790 | 1170 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| TensileImpactStrength | ASTMD1822 | 205 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 74.0 °C | ||
| brittle temperature | ASTMD746 | <-90.0 °C | |
| vicat | ASTMD1525 | 127 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top