Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE HGB-0454 Channel Prime Alliance
--
film
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Channel Prime Alliance/ HGB-0454 |
|---|---|---|---|
| Impact Strength | 23°C,CompressionMolded | ASTM D1822 | 205 kJ/m² |
| Supplementary Information | Test Condition | Test Method | Channel Prime Alliance/ HGB-0454 |
|---|---|---|---|
| Blow molding mold temperature | 10to30 °C | ||
| Blow molding temperature | 160to180 °C |
| Mechanical properties | Test Condition | Test Method | Channel Prime Alliance/ HGB-0454 |
|---|---|---|---|
| Flexural modulus | CompressionMolded | ASTM D790 | 1170 MPa |
| tensile strength | 屈服,模压成型 | ASTM D638 | 27.0 MPa |
| Tensile strain | Yield,CompressionMolded | ASTM D638 | 1000 % |
| physical property | Test Condition | Test Method | Channel Prime Alliance/ HGB-0454 |
|---|---|---|---|
| density | ASTM D1505 | 0.954 g/cm³ | |
| Environmental stress cracking resistance | 50°C,1.75mm,100%Igepal,CompressionMolded,F50 | ASTM D1693B | 60.0 hr |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 0.30 g/10min |
| Thermal performance | Test Condition | Test Method | Channel Prime Alliance/ HGB-0454 |
|---|---|---|---|
| vicat | ASTM D1525 | 127 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 74.0 °C |
| brittle temperature | ASTM D746 | <-90.0 °C |
Contact Us
Get App
Top