Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.11 g/cm³ |
| Shrinkage rate | | ASTMD955 | 1.1 % |
| Shrinkage rate | | ASTMD955 | 1.1 % |
| Water absorption rate | Saturation | ASTMD570 | 0.020 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 850 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 775 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| | ISO180 | 18 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/A | 2.2 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 2000 MPa |
| tensile strength | Yield | ASTMD638 | 20.0 MPa |
| elongation | Break | ASTMD638 | >20 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| CTI | | IEC60112 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648A | 70.0 °C |
| vicat | | ASTMD15251 | 105 °C |
| RTI Elec | | UL746 | 110 °C |
| RTI Imp | | UL746 | 110 °C |
| RTI | | UL746 | 110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare