Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP VAMPLEN 1028 V0 VAMP TECH ITALY
--
--
Filler, glass fiber reinforced material, 10%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | VAMP TECH ITALY/VAMPLEN 1028 V0 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/A | 2.2 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 18 kJ/m² |
| Electrical performance | Test Condition | Test Method | VAMP TECH ITALY/VAMPLEN 1028 V0 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 |
| Mechanical properties | Test Condition | Test Method | VAMP TECH ITALY/VAMPLEN 1028 V0 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | >20 % |
| Tensile modulus | ASTM D638 | 2000 MPa | |
| tensile strength | 屈服 | ASTM D638 | 20.0 MPa |
| flammability | Test Condition | Test Method | VAMP TECH ITALY/VAMPLEN 1028 V0 |
|---|---|---|---|
| UL flame retardant rating | 3.20mm | UL 94 | V-0 |
| Hot filament ignition temperature | 3.00mm | IEC 60695-2-13 | 775 °C |
| Burning wire flammability index | 3.00mm | IEC 60695-2-12 | 850 °C |
| UL flame retardant rating | 1.60mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | VAMP TECH ITALY/VAMPLEN 1028 V0 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 1.1 % |
| Water absorption rate | 饱和 | ASTM D570 | 0.020 % |
| density | ASTM D792 | 1.11 g/cm³ | |
| Shrinkage rate | TD | ASTM D955 | 1.1 % |
| Thermal performance | Test Condition | Test Method | VAMP TECH ITALY/VAMPLEN 1028 V0 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648A | 70.0 °C |
| vicat | ASTM D15251 | 105 °C | |
| RTI Imp | UL 746 | 110 °C | |
| RTI | UL 746 | 110 °C | |
| RTI Elec | UL 746 | 110 °C |
Contact Us
Get App
Top