PA66 TECHNAMID® A A-SV30-TAP
0
- Properties:Fillersglass fiber reinforced materials
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.35 g/cm³ | ||
| Shrinkage rate | 0.40到0.60 % | ||
| Water absorption rate | 5.0 % | ||
| 1.9 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | 6.0 kJ/m² | ||
| Impact strength of simply supported beam without notch | 35 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | Yield | 170 MPa | |
| Tensile strain | Break | 3.0 % | |
| Flexural modulus | 8500 MPa | ||
| Bending stress | 230 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | 1E+13 ohms | ||
| Volume resistivity | 1E+15 ohms·cm | ||
| dielectric strength | 24 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 240 °C | |||
| melting temperature | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top