Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 TECHNAMID® A A-SV30-TAP Poly Plastic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Poly Plastic/TECHNAMID® A A-SV30-TAP |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 20°C | 35 kJ/m² | |
| Charpy Notched Impact Strength | 20°C | 6.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Poly Plastic/TECHNAMID® A A-SV30-TAP |
|---|---|---|---|
| Flexural modulus | 23°C | 8500 MPa | |
| Tensile strain | 断裂 | 3.0 % | |
| bending strength | 230 MPa | ||
| tensile strength | 屈服 | 170 MPa |
| Electrical performance | Test Condition | Test Method | Poly Plastic/TECHNAMID® A A-SV30-TAP |
|---|---|---|---|
| Surface Resistivity | 2.00mm | 1E+13 ohms | |
| dielectric strength | 2.00mm | 24 kV/mm | |
| Volume resistivity | 1E+15 ohms·cm |
| physical property | Test Condition | Test Method | Poly Plastic/TECHNAMID® A A-SV30-TAP |
|---|---|---|---|
| Shrinkage rate | 0.40to0.60 % | ||
| density | 1.35 g/cm³ | ||
| Water absorption rate | 饱和,23°C | 5.0 % | |
| 平衡,23°C,50%RH | 1.9 % |
| Thermal performance | Test Condition | Test Method | Poly Plastic/TECHNAMID® A A-SV30-TAP |
|---|---|---|---|
| melting temperature | 260 °C | ||
| Heat distortion temperature | 1.8MPa,未退火，HDT | 240 °C |
Contact Us
Get App
Top