NBR NANCAR® 1041 Nantex Industry Co., Ltd.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

elastomer	Test Condition	Test Method	Test Result	Test Unit
Permanent compression deformation	100°C,70hr	ASTM D395	59	%
tear strength		ASTM D624	61.0	kN/m
elongation	Break5	ASTM D412	500	%
	elongation	Break4	ASTM D412	550	%
	elongation	elongation	Break3	ASTM D412	600	%
tensile strength	Yield5	ASTM D412	26.6	MPa
	tensile strength	Yield4	ASTM D412	27.3	MPa
		tensile strength	Yield3	ASTM D412	28.0	MPa
			tensile strength	300%Strain5	ASTM D412	13.9	MPa
				tensile strength	300%Strain4	ASTM D412	12.7	MPa
				tensile strength	tensile strength	300%Strain3	ASTM D412	11.3	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Heat loss		ASTM D5688	0.40	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density			1.00	g/cm³
Mooney viscosity	ML1+4,100°C	ASTM D1646	82	MU
Mooney viscosity	Mooney viscosity	ML1+4,100°C2	ASTM D1646	100	MU
bound acrylonitrile content		Internal Method	41.0	%
stabilizer			Non-staining
Soluble inMEK			100	%
viscosity	Minimum	ASTM D1646	56.0
	viscosity	Minutesto35pointsrise,t35	ASTM D1646	35.7	min
	viscosity	viscosity	Minutesto5pointsrise,t5	ASTM D1646	33.3	min
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,5Sec5	ASTM D2240	75
	Shore hardness	ShoreA,5Sec4	ASTM D2240	74
	Shore hardness	Shore hardness	ShoreA,5Sec3	ASTM D2240	73
aging	Test Condition	Test Method	Test Result	Test Unit
Change rate of tensile strength in air	100°C,70hr	ASTM D573	-8.0	%
Volume change	100°C,70hr,在IRM903油中	ASTM D471	10	%
Volume change	Volume change	100°C,70hr,ASTM标准油（1号）	ASTM D471	-0.90	%
Change rate of hardness (Shore) in the air	支撐A,100°C,70hr,在IRM903油中	ASTM D471	-6.0
Change rate of hardness (Shore) in the air	Change rate of hardness (Shore) in the air	支撐A,100°C,70hr,在ASTM#1油中	ASTM D471	2.0
Change rate of ultimate elongation in air	100°C,70hr,在ASTM#1油中	ASTM D471	-26	%
Change rate of tensile strength in air	100°C,70hr,在IRM903油中	ASTM D471	-11	%
Change rate of tensile strength in air	Change rate of tensile strength in air	100°C,70hr,在ASTM#1油中	ASTM D471	-6.0	%
Change rate of hardness (Shore) in the air	ShoreA,100°C,70hr	ASTM D573	3.0
Change rate of ultimate elongation in air	100°C,70hr	ASTM D573	-29	%
Change rate of ultimate elongation in air	Change rate of ultimate elongation in air	100°C,70hr,在IRM903油中	ASTM D471	-19	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top