PA12 Laticonther 83 CP/80 LATI S.p.A.
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 2.96 g/cm³ | |
| Shrinkage rate | ISO 294-4 | 0.65to0.85 % | |
| ISO 294-4 | 0.65to0.85 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Burning wire flammability index | IEC 60695-2-12 | 750750 °C | |
| Hot filament ignition temperature | IEC 60695-2-13 | 775 °C | |
| IEC 60695-2-13 | 775 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 3700 MPa | |
| tensile strength | ISO 527-2/5 | 40.0 MPa | |
| Tensile strain | ISO 527-2/5 | 1.4 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 3.5 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 25 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 120 °C | |
| ISO 75-2/A | 70.0 °C | ||
| vicat | ISO 306/B50 | 150 °C | |
| thermal conductivity | 内部方法 | 2.1 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top