Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 Laticonther 83 CP/80 LATI S.p.A.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LATI S.p.A./Laticonther 83 CP/80 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 3.5 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 25 kJ/m² |
| Mechanical properties | Test Condition | Test Method | LATI S.p.A./Laticonther 83 CP/80 |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO 527-2/5 | 1.4 % |
| tensile strength | 断裂,23°C | ISO 527-2/5 | 40.0 MPa |
| Tensile modulus | 23°C | ISO 527-2/1 | 3700 MPa |
| flammability | Test Condition | Test Method | LATI S.p.A./Laticonther 83 CP/80 |
|---|---|---|---|
| Hot filament ignition temperature | 2.0mm | IEC 60695-2-13 | 775 °C |
| 1.0mm | IEC 60695-2-13 | 775 °C | |
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 750750 °C |
| physical property | Test Condition | Test Method | LATI S.p.A./Laticonther 83 CP/80 |
|---|---|---|---|
| Shrinkage rate | MD:2.00mm | ISO 294-4 | 0.65to0.85 % |
| density | ISO 1183 | 2.96 g/cm³ | |
| Shrinkage rate | TD:2.00mm | ISO 294-4 | 0.65to0.85 % |
| Thermal performance | Test Condition | Test Method | LATI S.p.A./Laticonther 83 CP/80 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 120 °C |
| vicat | ISO 306/B50 | 150 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 70.0 °C |
| thermal conductivity | 内部方法 | 2.1 W/m/K |
Contact Us
Get App
Top