PC LUBEXAN 1015 GREY TQ LUBEN PLAST srl

Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	23°C3	ASTM D256	无断裂
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C4	ASTM D256	45to55 kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	25to30 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Impact strength of cantilever beam gap	23°C,3.20mm	ASTM D256A	450to550 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/A	25to30 kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180	无断裂

flammability	Test Condition	Test Method	Test Result
Burning wire flammability index	2.0mm	IEC 60695-2-12	850 °C

mechanical properties	Test Condition	Test Method	Test Result
bending strength		ISO 178	50.0to60.0 MPa
Tensile strain	Yield	ISO 527-2/1A/50	4.0to7.0 %
Tensile strain	Tensile strain	Break	ISO 527-2/1A/50	15to20 %
Bending modulus		ISO 178	1800to2200 MPa
Tensile modulus		ISO 527-2/1A/1	2000to2500 MPa
tensile strength	Yield	ISO 527-2/1A/50	45.0to50.0 MPa
tensile strength	tensile strength	Break	ISO 527-2/1A/50	40.0to45.0 MPa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	0.45MPa,Unannealed,3.20mm	ASTM D648	130to140 °C
	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	135to145 °C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	120to130 °C
Glass transition temperature		Internal Method	140to150 °C
Vicat softening temperature	--	ISO 306/A120	140to150 °C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	135to145 °C

Physical properties	Test Condition	Test Method	Test Result
density		ISO 1183/A	1.17to1.21 g/cm³
melt mass-flow rate	300°C/1.2kg	ISO 1133	10to15 g/10min
Water absorption rate	23°C,24hr,3.20mm	ISO 62	0.15 %
Water absorption rate	Water absorption rate	Saturation,23°C,3.20mm	ISO 62	0.36 %

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top