SBC KIBITON® Q-Resin PB-5903

Properties:
Mechanical properties
Compare

Technical Data Sheet

	Test Condition	Test Method	Test Result
Flexural modulus		ISO178	1.4E+06 MPa
bending strength		ASTMD790	33.3 MPa
bending strength	bending strength		ISO178	36.0 MPa
Charpy Notched Impact Strength		ISO179	2.8 kJ/m²
transmissivity		ASTMD1003	90.5 %
Haze ratio		ASTMD1003	1.5 %
		ASTMD648	70.0 °C
density		ASTMD792	1.02 g/cm³
density	density		ISO1183	1.01 g/cm³
melt mass-flow rate		ASTMD1238	10 g/10min
Melt volume flow rate		ISO1133	10.0 cm³/10min
tensile strength	Yield	ASTMD638	28.4 MPa
Tensile stress		ISO527-2/50	27.0 MPa
Tensile stress	Tensile stress		ISO527-2/50	19.0 MPa
TensileStrain		ISO527-2/50	2.0 %
vicat		ASTMD15256	84.0 °C
	vicat		ISO306/A50	93.0 °C
		vicat		ISO306/A120	89.0 °C
			vicat		ISO306/B50	70.0 °C
			vicat	vicat		ISO306/B120	68.0 °C
Tensile strain		ISO527-2/50	200 %
Flexural modulus		ASTMD790	1370 MPa
Impact strength of simply supported beam without notch		ISO179	72 kJ/m²
Impact strength of cantilever beam gap		ASTMD256	23 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180/1A	2.3 kJ/m²
		ASTMD2240	71
			ISO75-2/A	71.0到83.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top