PK PermaStat® 4500 RTP US

Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength	3.20mm	ASTM D4812	无断裂
Impact strength of cantilever beam gap	3.20mm	ASTM D256	160 J/m

mechanical properties	Test Condition	Test Method	Test Result
bending strength		ASTM D790	36.2 MPa
Bending modulus		ASTM D790	1030 MPa
elongation	Yield	ASTM D638	>10 %
tensile strength		ASTM D638	34.5 MPa
Tensile modulus		ASTM D638	758 MPa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	46.1 °C

Physical properties	Test Condition	Test Method	Test Result
water content			<0.050 %
Shrinkage rate	MD：3.20mm	ASTM D955	1.8to2.5 %
density		ASTM D792	1.21 g/cm³

Electrical performance	Test Condition	Test Method	Test Result
StaticDecay		FTMS101C4046.1	<2.0 sec
Volume resistivity		ASTM D257	1.0E+9到9.9E+10 ohms·cm
Surface resistivity	--	ASTM D257	1.0E+10到9.9E+11 ohms
Surface resistivity	Surface resistivity	--	ESDSTM11.11	1.0E+9到9.9E+10 ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top