Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PK PermaStat® 4500 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/PermaStat® 4500 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 无断裂 |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 160 J/m |
| Mechanical properties | Test Condition | Test Method | RTP US/PermaStat® 4500 |
|---|---|---|---|
| tensile strength | ASTM D638 | 34.5 MPa | |
| elongation | 屈服 | ASTM D638 | >10 % |
| Tensile modulus | ASTM D638 | 758 MPa | |
| Flexural modulus | ASTM D790 | 1030 MPa | |
| bending strength | ASTM D790 | 36.2 MPa |
| Electrical performance | Test Condition | Test Method | RTP US/PermaStat® 4500 |
|---|---|---|---|
| Surface Resistivity | -- | ASTM D257 | 1.0E+10到9.9E+11 ohms |
| Volume resistivity | ASTM D257 | 1.0E+9到9.9E+10 ohms·cm | |
| StaticDecay | FTMS101C4046.1 | <2.0 sec | |
| Surface Resistivity | -- | ESDSTM11.11 | 1.0E+9到9.9E+10 ohms |
| physical property | Test Condition | Test Method | RTP US/PermaStat® 4500 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 1.8to2.5 % |
| water content | <0.050 % | ||
| density | ASTM D792 | 1.21 g/cm³ |
| Thermal performance | Test Condition | Test Method | RTP US/PermaStat® 4500 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 46.1 °C |
Contact Us
Get App
Top