PBT P3050 TYNE USA

Properties:
Performance characteristics
moderate fluidity
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ASTM D792	1.10 g/cm3
Shrinkage rate	ASTM D955	0.50-0.70 %
Water absorption rate	ASTM D570	0.20 %
density	ASTM D792	1.10 g/cm³
Shrinkage rate	ASTM D955	0.50to0.70 %
Water absorption rate	ASTM D570	0.20 %

Mechanical properties	Test Condition	Test Method	Test Result
Fracture tensile strength		ASTM D638	52.4 MPa
elongation at yield		ASTM D638	200 %
Flexural modulus		ASTM D790	2280 MPa
bending strength		ASTM D790	82.7 MPa
Impact strength of cantilever beam gap		ASTM D256	53 J/m
Suspended wall beam without notch impact strength		ASTM D256	3200 J/m
tensile strength	Break	ASTM D638	52.4 MPa
elongation	Yield	ASTM D638	200 %
Flexural modulus		ASTM D790	2280 MPa
bending strength		ASTM D790	82.7 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	53 J/m
Suspended wall beam without notch impact strength		ASTM D256	3200 J/m

Electrical performance	Test Method	Test Result
dielectric constant	ASTM D150	3.00
Dissipation Factor	ASTM D150	0.020
Volume resistivity	ASTM D257	3E+16 ohm.cm
dielectric strength	ASTM D149	23 kV/mm
Volume resistivity	ASTM D257	3E+16 ohms·cm
dielectric strength	ASTM D149	23 kV/mm
dielectric constant	ASTM D150	3.00
Dissipation Factor	ASTM D150	0.020

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	160 ℃
	Heat distortion temperature		ASTM D648	51.7 ℃
		Heat distortion temperature		ASTM D648	51.7 °C
		Heat distortion temperature	Heat distortion temperature		ASTM D648	160 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top