Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT P3050 TYNE USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodTYNE USA/P3050
Impact strength of cantilever beam gap3.18mmASTM D25653 J/m
Suspended wall beam without notch impact strength3.18mmASTM D2563200 J/m
Electrical performanceTest ConditionTest MethodTYNE USA/P3050
dielectric strength1.57mm,inAirASTM D14923 kV/mm
Volume resistivityASTM D2573E+16 ohms·cm
Dissipation Factor1MHzASTM D1500.020
dielectric constant1 MHzASTM D1503.00
dielectric strength1.57mm,in AirASTM D14923 kV/mm
Volume resistivityASTM D2573E+16 ohm.cm
dielectric constant1MHzASTM D1503.00
Dissipation Factor1 MHzASTM D1500.020
Mechanical propertiesTest ConditionTest MethodTYNE USA/P3050
Impact strength of cantilever beam gap3.18mmASTM D25653 J/m
elongation at yieldASTM D638200 %
Suspended wall beam without notch impact strength3.18mmASTM D2563200 J/m
elongation屈服ASTM D638200 %
Flexural modulusASTM D7902280 MPa
tensile strength 断裂ASTM D63852.4 MPa
bending strengthASTM D79082.7 MPa
Fracture tensile strength断裂ASTM D63852.4 MPa
physical property Test ConditionTest MethodTYNE USA/P3050
Shrinkage rateMDASTM D9550.50to0.70 %
ASTM D9550.50-0.70 %
Water absorption rate24hrASTM D5700.20 %
densityASTM D7921.10 g/cm3
ASTM D7921.10 g/cm³
Thermal performanceTest ConditionTest MethodTYNE USA/P3050
Heat distortion temperature1.8MPa,未退火，HDTASTM D648160 °C
0.45MPa,未退火，HDTASTM D64851.7 °C
1.8MPa,未退火，HDTASTM D648160 ℃
0.45MPa,未退火，HDTASTM D64851.7 ℃

Contact Us

Get App

Top