EVA 12-9
0
- Usages:Injection molding
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| VA content | ISC.DIS 8965/1989(E) | 12 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| MFIs | ASTM D-1238 | 9 g/10 | |
| density | ASTM D-1505 | 0.932 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D-2240 | 38 | |
| tensile yield strength | ASTM D-638 | 5.3 N/mm | |
| ASTM D-638 | 5.3 N/mm | ||
| tensile elongation at break | ASTM D-6398 | 800 % | |
| ASTM D-6398 | 800 % | ||
| tensile breaking strength | ASTM D-638 | 10.3 N/mm | |
| ASTM D-638 | 10.3 N/mm | ||
| Shore hardness | ASTM D-2240 | 94 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric strength | ASTM D-149 | 700 KV/cm | |
| dielectric constant | ASTM D-150 | 2.8 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting point | 97 °C | ||
| vicat | ASTM D-1525 | 69 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top