Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183/A | 1.40 g/cm³ |
| melt mass-flow rate | | ISO 1133 | 3.9 g/10min |
| Water absorption rate | | | <15.0 mg/cm² |
| pH value | | IEC 60754-2 | >4.5 |
| Shrinkage rate | | IEC 811-1-3 | <2.0 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ISO 7619 | 50 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| HalogenContent | | IEC 754-1 | 0 % |
| toxicity | | EN50305 | 2.60 |
| Limiting Oxygen Index | | ASTM D2863 | 32 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | IEC 811-1-1 | >15.0 MPa |
| tensile strength | | IEC 811-1-1 | >16.0 MPa |
| Tensile strain | | IEC 811-1-1 | >200 % |
| Tensile strain | | IEC 811-1-1 | >150 % |
| Tensile strain | | IEC 811-1-4 | >30 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength in air | | IEC 811-1-2 | <25 % |
| Tensile stress change rate | | IEC 811-1-2 | <25 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60093 | 1E+15 ohms·cm |
| Volume resistivity | | IEC 60093 | <1.0E+12 ohms·cm |
| conductivity | | EN50267-2-2 | <4.00 µS/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| thermosetting | | IEC 540 | <60 % |
| thermosetting | | IEC 540 | <10 % |
| Hot pressing test | | DIN VDE0472 | <50 % |
| TEMPERATURE | | ASTM D2863 | 250 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare