Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TP, Unspecified Mecoline IS RDX 1232 F MELOS GERMANY
--
Application of wires and cables, insulation materials, and cable sheaths
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | MELOS GERMANY/Mecoline IS RDX 1232 F |
|---|---|---|---|
| Shore hardness | ShoreD | ISO 7619 | 50 |
| thermal performance | Test Condition | Test Method | MELOS GERMANY/Mecoline IS RDX 1232 F |
|---|---|---|---|
| Hot pressing test | 穿透 | DIN VDE0472 | <50 % |
| Temperature index | ASTM D2863 | 250 °C | |
| thermosetting | Residualelongation | IEC 540 | <10 % |
| Elongationunderload | IEC 540 | <60 % |
| mechanical properties | Test Condition | Test Method | MELOS GERMANY/Mecoline IS RDX 1232 F |
|---|---|---|---|
| Tensile strain | Break3 | IEC 811-1-1 | >150 % |
| Break2 | IEC 811-1-1 | >200 % | |
| Break,-40°C | IEC 811-1-4 | >30 % | |
| tensile strength | --3 | IEC 811-1-1 | >16.0 MPa |
| --2 | IEC 811-1-1 | >15.0 MPa |
| Electrical performance | Test Condition | Test Method | MELOS GERMANY/Mecoline IS RDX 1232 F |
|---|---|---|---|
| conductivity | EN50267-2-2 | <4.00 µS/mm | |
| Volume resistivity | 23°C | IEC 60093 | 1E+15 ohms·cm |
| 90°C | IEC 60093 | <1.0E+12 ohms·cm |
| Physical properties | Test Condition | Test Method | MELOS GERMANY/Mecoline IS RDX 1232 F |
|---|---|---|---|
| density | ISO 1183/A | 1.40 g/cm³ | |
| melt mass-flow rate | 190°C/10.0kg | ISO 1133 | 3.9 g/10min |
| PH value | IEC 60754-2 | >4.5 | |
| Shrinkage rate | IEC 811-1-3 | <2.0 % | |
| Water absorption rate | <15.0 mg/cm² |
| flammability | Test Condition | Test Method | MELOS GERMANY/Mecoline IS RDX 1232 F |
|---|---|---|---|
| Extreme Oxygen Index | ASTM D2863 | 32 % | |
| HalogenContent | IEC 754-1 | 0 % | |
| toxicity | EN50305 | 2.60 |
| aging | Test Condition | Test Method | MELOS GERMANY/Mecoline IS RDX 1232 F |
|---|---|---|---|
| Change rate of tensile strength in air | 120°C,240hr | IEC 811-1-2 | <25 % |
| Tensile stress change rate | 120°C,240hr,Break | IEC 811-1-2 | <25 % |