PES LNP™ COLORCOMP™ J1000E compound SABIC
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.37 g/cm³ | |
| Shrinkage rate | 内部方法 | 0.90 % | |
| Water absorption rate | ISO 62 | 0.90 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180/1U | 无断裂 | |
| Impact strength of cantilever beam gap | ISO 180/1A | 7.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 2800 MPa | |
| bending strength | ISO 178 | 136 MPa | |
| Tensile modulus | ISO 527-2/1 | 2700 MPa | |
| tensile strength | Yield | ISO 527-2/50 | 91.0 MPa |
| Break | ISO 527-2/50 | 65.0 MPa | |
| Tensile strain | Yield | ISO 527-2/50 | 6.8 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/Af | 197 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 5.6E-05 cm/cm/°C | |
| ISO 11359-2 | 5.7E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top