Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PES LNP™ COLORCOMP™ J1000E compound SABIC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC/LNP™ COLORCOMP™ J1000E compound |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 无断裂 |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 7.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SABIC/LNP™ COLORCOMP™ J1000E compound |
|---|---|---|---|
| Flexural modulus | ISO 178 | 2800 MPa | |
| Tensile modulus | ISO 527-2/1 | 2700 MPa | |
| Tensile strain | 屈服 | ISO 527-2/50 | 6.8 % |
| bending strength | ISO 178 | 136 MPa | |
| tensile strength | 屈服 | ISO 527-2/50 | 91.0 MPa |
| 断裂 | ISO 527-2/50 | 65.0 MPa |
| physical property | Test Condition | Test Method | SABIC/LNP™ COLORCOMP™ J1000E compound |
|---|---|---|---|
| Shrinkage rate | MD | 内部方法 | 0.90 % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.90 % |
| density | ISO 1183 | 1.37 g/cm³ |
| Thermal performance | Test Condition | Test Method | SABIC/LNP™ COLORCOMP™ J1000E compound |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD:23到60°C | ISO 11359-2 | 5.7E-05 cm/cm/°C |
| MD:23到60°C | ISO 11359-2 | 5.6E-05 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Af | 197 °C |
Contact Us
Get App
Top