ABS KumhoSunny ABS HU650SK-P
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 4.0 g/10min | |
| density | ISO 1183 | 1.06 g/cm³ | |
| Shrinkage rate | ISO 294-4 | 0.40to0.70 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180 | 无断裂 | |
| ISO 180 | 无断裂 | ||
| Charpy Notched Impact Strength | ISO 179 | 22 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179 | 无断裂 | |
| Impact strength of cantilever beam gap | ISO 180 | 10 kJ/m² | |
| ISO 180 | 20 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179 | 无断裂 | |
| Charpy Notched Impact Strength | ISO 179 | 11 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 527-2/50 | 40.0 MPa | |
| Tensile strain | Break | ISO 527-2/50 | 65 % |
| Flexural modulus | ISO 178 | 2360 MPa | |
| bending strength | ISO 178 | 65.0 MPa | |
| Poisson's ratio | ISO 527 | 0.39 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+15 ohms | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 111 °C | |
| ISO 75-2/A | 95.0 °C | ||
| vicat | ISO 306/B50 | 115 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 7.7E-05 cm/cm/°C | |
| ISO 11359-2 | 7.6E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top