Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS KumhoSunny ABS HU650SK-P Shanghai KumhoSunny Plastics Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny ABS HU650SK-P |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 22 kJ/m² |
| -30°C | ISO 179 | 11 kJ/m² | |
| Impact strength of cantilever beam gap | 23°C | ISO 180 | 20 kJ/m² |
| Suspended wall beam without notch impact strength | -30°C | ISO 180 | 无断裂 |
| Impact strength of cantilever beam gap | -30°C | ISO 180 | 10 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 无断裂 |
| Suspended wall beam without notch impact strength | 23°C | ISO 180 | 无断裂 |
| Impact strength of simply supported beam without notch | -30°C | ISO 179 | 无断裂 |
| Electrical performance | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny ABS HU650SK-P |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+15 ohms |
| Mechanical properties | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny ABS HU650SK-P |
|---|---|---|---|
| tensile strength | ISO 527-2/50 | 40.0 MPa | |
| Flexural modulus | 64.0mm | ISO 178 | 2360 MPa |
| bending strength | 64.0mm | ISO 178 | 65.0 MPa |
| Tensile strain | 断裂 | ISO 527-2/50 | 65 % |
| Poisson's ratio | ISO 527 | 0.39 |
| physical property | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny ABS HU650SK-P |
|---|---|---|---|
| Shrinkage rate | 23°C | ISO 294-4 | 0.40to0.70 % |
| density | 23°C | ISO 1183 | 1.06 g/cm³ |
| melt mass-flow rate | 220°C/10.0kg | ISO 1133 | 4.0 g/10min |
| Thermal performance | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny ABS HU650SK-P |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 111 °C |
| vicat | ISO 306/B50 | 115 °C | |
| Linear coefficient of thermal expansion | MD:-40到40°C | ISO 11359-2 | 7.7E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 95.0 °C |
| Linear coefficient of thermal expansion | TD:-40到40°C | ISO 11359-2 | 7.6E-05 cm/cm/°C |
Contact Us
Get App
Top