POM/PTFE LNP™ LUBRICOMP™ KL-4010
82
- Properties:wear resistant
- Usages:Electronic and Electrical Applications
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTMD955 | 2.3 % | |
| ASTMD955 | 2.3 % | ||
| ISO294-4 | 2.3 % | ||
| ISO294-4 | 2.3 % | ||
| Water absorption rate | ASTMD570 | 0.20 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact equipped with measuring instruments | ASTMD3763 | 5.30 J | |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 0.900 J | |
| Suspended wall beam gap impact strength 3 | ISO180/1A | 48 kJ/m² | |
| UnnotchedIzodImpactStrength3 | ISO180/1U | 1000 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/1 | 2620 Mpa | |
| tensile strength | ASTMD638 | 55.2 Mpa | |
| Tensile stress | ISO527-2 | 54.0 Mpa | |
| tensile strength | ASTMD638 | 52.4 Mpa | |
| Tensile stress | ISO527-2 | 53.0 Mpa | |
| elongation | ASTMD638 | 9.9 % | |
| Tensile strain | ISO527-2 | 11 % | |
| elongation | ASTMD638 | 34 % | |
| Tensile strain | ISO527-2 | 30 % | |
| Flexural modulus | ASTMD790 | 3450 Mpa | |
| Tensile modulus | ASTMD638 | 2760 Mpa | |
| Flexural modulus | ISO178 | 2000 Mpa | |
| bending strength | ASTMD790 | 13.8 Mpa | |
| Bending stress | ISO178 | 70.0 Mpa | |
| ASTMD3702Modified | 0.38 | ||
| ASTMD3702Modified | 0.18 | ||
| Wear factor - Washer | ASTMD3702Modified | 22.5 10^-10in^5-min/ft-lb-hr |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 158 °C | ||
| Hot deformation temperature 4 | ISO75-2/Bf | 149 °C | |
| ASTMD648 | 112 °C | ||
| Hot deformation temperature 4 | ISO75-2/Af | 96.0 °C | |
| ASTME831 | 1.2E-04 cm/cm/°C | ||
| ISO11359-2 | 1.2E-04 cm/cm/°C | ||
| ASTME831 | 1.1E-04 cm/cm/°C | ||
| ISO11359-2 | 1.1E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top