Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM/PTFE KL-4010 SABIC INNOVATIVE US
LNP™ LUBRICOMP™
Electronic and Electrical
wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/KL-4010 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 1000 kJ/m² |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 0.900 J | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 48 kJ/m² |
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 5.30 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/KL-4010 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2620 Mpa | |
| elongation | 屈服 | ASTM D638 | 9.9 % |
| bending strength | ASTM D790 | 13.8 Mpa | |
| Tensile strain | 屈服 | ISO 527-2 | 11 % |
| tensile strength | 断裂 | ASTM D638 | 52.4 Mpa |
| 断裂 | ISO 527-2 | 53.0 Mpa | |
| Wear factor | Washer | ASTM D3702Modified | 22.5 10^-10in^5-min/ft-lb-hr |
| Flexural modulus | ASTM D790 | 3450 Mpa | |
| Tensile modulus | ASTM D638 | 2760 Mpa | |
| elongation | 断裂 | ASTM D638 | 34 % |
| bending strength | ISO 178 | 70.0 Mpa | |
| coefficient of friction | Static | ASTM D3702Modified | 0.18 |
| Tensile strain | 断裂 | ISO 527-2 | 30 % |
| Flexural modulus | ISO 178 | 2000 Mpa | |
| tensile strength | 屈服 | ASTM D638 | 55.2 Mpa |
| 屈服 | ISO 527-2 | 54.0 Mpa | |
| coefficient of friction | Dynamic | ASTM D3702Modified | 0.38 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/KL-4010 |
|---|---|---|---|
| Shrinkage rate | MD:24小时 | ISO 294-4 | 2.3 % |
| MD：24小时 | ASTM D955 | 2.3 % | |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.20 % |
| Shrinkage rate | TD：24hr | ASTM D955 | 2.3 % |
| TD:24小时 | ISO 294-4 | 2.3 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/KL-4010 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Bf | 149 °C |
| Linear coefficient of thermal expansion | TD：-40到40°C | ASTME831 | 1.1E-04 cm/cm/°C |
| TD：-40到40°C | ISO 11359-2 | 1.1E-04 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 158 °C |
| Linear coefficient of thermal expansion | MD：-40到40°C | ASTME831 | 1.2E-04 cm/cm/°C |
| MD：-40到40°C | ISO 11359-2 | 1.2E-04 cm/cm/°C | |
| Heat distortion temperature | 1.8MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Af | 96.0 °C |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 112 °C |
Contact Us
Get App
Top