AES+PC KumhoSunny PC/AES HEC0275
0
- Properties:physical property
- Usages:Electrical componentsautomotive applicationselectrical and electronic applications
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.15 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 13 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.50to0.70 % |
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.50to0.70 % | |
| tensile strength | ASTM D638 | 60.0 MPa | |
| ISO 527-2/50 | 58.0 MPa | ||
| elongation | Break | ASTM D638 | 100 % |
| Flexural modulus | ASTM D790 | 2200 MPa | |
| ISO 178 | 2200 MPa | ||
| bending strength | ASTM D790 | 80.0 MPa | |
| ISO 178 | 75.0 MPa | ||
| Charpy Notched Impact Strength | ISO 179 | 32 kJ/m² | |
| ISO 179 | 50 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179 | 无断裂 | |
| Impact strength of cantilever beam gap | ASTM D256 | 700 J/m | |
| ISO 180 | 48 kJ/m² | ||
| Heat distortion temperature | ISO 75-2/A | 108 °C | |
| vicat | ISO 306/B50 | 120 °C | |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| Heat distortion temperature | ASTM D648 | 110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top