Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

AES+PC KumhoSunny PC/AES HEC0275 Shanghai KumhoSunny Plastics Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny PC/AES HEC0275 |
---|---|---|---|
Shrinkage rate | MD | ASTM D955 | 0.50to0.70 % |
Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny PC/AES HEC0275 | |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 100 % |
Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 700 J/m |
23°C4 | ISO 180 | 48 kJ/m² | |
tensile strength | -- | ASTM D638 | 60.0 MPa |
Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
Charpy Notched Impact Strength | 23°C | ISO 179 | 50 kJ/m² |
Heat distortion temperature | 1.8MPa,未退火5,HDT | ISO 75-2/A | 108 °C |
Flexural modulus | --2 | ISO 178 | 2200 MPa |
vicat | ISO 306/B50 | 120 °C | |
bending strength | --2 | ISO 178 | 75.0 MPa |
Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
Charpy Notched Impact Strength | -30°C | ISO 179 | 32 kJ/m² |
Impact strength of simply supported beam without notch | 23°C | ISO 179 | 无断裂 |
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 110 °C |
bending strength | -- | ASTM D790 | 80.0 MPa |
Shrinkage rate | -- | ISO 294-4 | 0.50to0.70 % |
tensile strength | -- | ISO 527-2/50 | 58.0 MPa |
Flexural modulus | -- | ASTM D790 | 2200 MPa |
physical property | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny PC/AES HEC0275 |
---|---|---|---|
density | ASTMD792 | 1.15 g/cm³ | |
melt mass-flow rate | 230°C/10.0kg | ASTM D1238 | 13 g/10min |
Contact Us
Get App
Top