ABS

ABS Retelan® S GRIGIO191 SO.F.TER ITALY

Usages:
Electrical appliances
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	23°C	ASTM D256	200 J/m

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.8mm	UL 94	HB

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Break	ASTM D638	36.0 MPa
elongation	Break	ASTM D638	20 %
Bending modulus		ASTM D790	2500 MPa
bending strength		ASTM D790	70.0 MPa
tensile strength	Yield	ASTM D638	44.0 MPa
Tensile modulus		ASTM D638	2400 MPa

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	MD	ASTM D696	9E-05 cm/cm/°C
Vicat softening temperature	--	ASTM D15253	98.0 °C
Vicat softening temperature	Vicat softening temperature	--	ASTM D15252	105 °C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	100 °C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	23°C,24hr	ASTM D570	0.30 %
Shrinkage rate		Internal Method	0.50 %
melt mass-flow rate	220°C/10.0kg	ASTM D1238	18 g/10min
density		ASTM D792	1.05 g/cm³

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity	23°C	ASTM D257	1E+13 ohms·cm
Surface resistivity		ASTM D257	1E+15 ohms
Dissipation factor	1kHz	ASTM D150	4E-03
Dielectric constant	1kHz	ASTM D150	3.10
Dielectric strength	1.60mm	ASTM D149	30 kV/mm
Compared to the anti leakage trace index		IEC 60112	PLC 0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top