Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS Retelan® S GRIGIO191 SO.F.TER ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SO.F.TER ITALY/Retelan® S GRIGIO191 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 200 J/m |
| Electrical performance | Test Condition | Test Method | SO.F.TER ITALY/Retelan® S GRIGIO191 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Dissipation Factor | 1kHz | ASTM D150 | 4E-03 |
| Surface Resistivity | ASTM D257 | 1E+15 ohms | |
| dielectric constant | 1kHz | ASTM D150 | 3.10 |
| Volume resistivity | 23°C | ASTM D257 | 1E+13 ohms·cm |
| dielectric strength | 1.60mm | ASTM D149 | 30 kV/mm |
| Mechanical properties | Test Condition | Test Method | SO.F.TER ITALY/Retelan® S GRIGIO191 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 20 % |
| Tensile modulus | ASTM D638 | 2400 MPa | |
| tensile strength | 断裂 | ASTM D638 | 36.0 MPa |
| Flexural modulus | ASTM D790 | 2500 MPa | |
| tensile strength | 屈服 | ASTM D638 | 44.0 MPa |
| bending strength | ASTM D790 | 70.0 MPa |
| flammability | Test Condition | Test Method | SO.F.TER ITALY/Retelan® S GRIGIO191 |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| physical property | Test Condition | Test Method | SO.F.TER ITALY/Retelan® S GRIGIO191 |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 0.50 % | |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.30 % |
| density | ASTM D792 | 1.05 g/cm³ | |
| melt mass-flow rate | 220°C/10.0kg | ASTM D1238 | 18 g/10min |
| Thermal performance | Test Condition | Test Method | SO.F.TER ITALY/Retelan® S GRIGIO191 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 100 °C |
| vicat | -- | ASTM D15252 | 105 °C |
| -- | ASTM D15253 | 98.0 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 9E-05 cm/cm/°C |
Contact Us
Get App
Top