LDPE LD1407AA
0
- Properties:Good precipitationhomopolymerlow slip
- Usages:Moviesshrink packaging
CompareTechnical Data Sheet
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTM D-2457 | 60 | |
| Haze ratio | ASTM D-1003 | 8 % |
| processability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt Temperature | ASTM D-1709 | 160-200 ℃ |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183/D | 0.924 g/cm3 | |
| melt mass-flow rate | ISO 1133 | 0.75 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| coefficient of friction | ASTM D-1894 | 0.5 | |
| film thickness | ASTM D-1894 | 50 um | |
| Tensile modulus | ISO 527-3 | 200 MPa | |
| ISO 527-3 | 230 MPa | ||
| Tensile stress | ISO 527-3 | 12 MPa | |
| ISO 527-3 | 11 MPa | ||
| ISO 527-3 | 30 MPa | ||
| ISO 527-3 | 22 MPa | ||
| elongation at break | ISO 527-3 | 550 % | |
| ISO 527-3 | 190 % | ||
| Dart impact | ASTM D-1709 | 130 g |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306/A50 | 94 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top