Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LDPE LD1407AA Ineos
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos/LD1407AA |
|---|---|---|---|
| melt mass-flow rate | 190℃/2.16kg | ISO 1133 | 0.75 g/10min |
| density | ISO 1183/D | 0.924 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Ineos/LD1407AA |
|---|---|---|---|
| Tensile stress | 180℃，50um，Blown Film，MD，屈服 | ISO 527-3 | 12 MPa |
| elongation at break | 180℃，50um，Blown Film，MD | ISO 527-3 | 190 % |
| film thickness | ASTM D-1894 | 50 um | |
| Tensile modulus | 180℃，50um，Blown Film | ISO 527-3 | 230 MPa |
| coefficient of friction | Blown Film | ASTM D-1894 | 0.5 |
| elongation at break | 180℃，50um，Blown Film，TD | ISO 527-3 | 550 % |
| Tensile stress | 180℃，50um，Blown Film，MD | ISO 527-3 | 30 MPa |
| 180℃，50um，Blown Film，TD，屈服 | ISO 527-3 | 11 MPa | |
| 180℃，50um，Blown Film，TD | ISO 527-3 | 22 MPa | |
| Dart impact | 180℃，50um，Blown Film | ASTM D-1709 | 130 g |
| optical performance | Test Condition | Test Method | Ineos/LD1407AA |
|---|---|---|---|
| Haze ratio | 50um，Blown Film | ASTM D-1003 | 8 % |
| gloss | 45°，50um，Blown Film | ASTM D-2457 | 60 |
| processability | Test Condition | Test Method | Ineos/LD1407AA |
|---|---|---|---|
| Melt Temperature | ASTM D-1709 | 160-200 ℃ |
| Thermal performance | Test Condition | Test Method | Ineos/LD1407AA |
|---|---|---|---|
| vicat | ISO 306/A50 | 94 ℃ |
Contact Us
Get App
Top