ABS KU 2-3050 (Dry)
0
- Properties:Anti static functionhigh heat resistanceand good impact resistance
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1060 kg/m | |
| Melt volume flow rate | ISO 1133 | 6.00 cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-1 | 1850 MPa | |
| Tensile stress | ISO 527-1 | 40.0 MPa | |
| Tensile strain | ISO 527-1 | 3.2 % | |
| fracture strain | ISO 527-1 | >50.0 % | |
| Charpy Notched Impact Strength | ISO 179/1eA | 74.0 KJ/m | |
| ISO 179/1eA | 16.0 KJ/m | ||
| ISO 179/1eU | No Break KJ/m | ||
| ISO 179/1eU | No Break KJ/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dielectric loss | IEC 60250 | 0.030 | |
| dielectric strength | IEC 60243-1 | 34 KV/mm | |
| Volume resistivity | IEC 60093 | 1E+12 ohm.m | |
| relative permittivity | IEC 60250 | 4.30 | |
| IEC 60250 | 3.60 | ||
| Dielectric loss | IEC 60250 | 0.029 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-1 | 68.0 ℃ | |
| vicat | ISO 306 | 102 ℃ | |
| Linear coefficient of thermal expansion | ISO 11359-1 | 0.00010 cm/cm℃ | |
| ISO 11359-1 | 0.00012 cm/cm℃ | ||
| Heat distortion temperature | ISO 75-1 | 91.0 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top