Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS KU 2-3050 (Dry) Ineos ABS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos ABS/KU 2-3050 (Dry) |
|---|---|---|---|
| Melt volume flow rate | 260℃,5.0kg | ISO 1133 | 6.00 cm |
| density | ISO 1183 | 1060 kg/m |
| Electrical performance | Test Condition | Test Method | Ineos ABS/KU 2-3050 (Dry) |
|---|---|---|---|
| relative permittivity | 1000Hz | IEC 60250 | 3.60 |
| dielectric strength | IEC 60243-1 | 34 KV/mm | |
| relative permittivity | 100Hz | IEC 60250 | 4.30 |
| Volume resistivity | IEC 60093 | 1E+12 ohm.m | |
| Dielectric loss | 100Hz | IEC 60250 | 0.029 |
| 1000Hz | IEC 60250 | 0.030 |
| Mechanical properties | Test Condition | Test Method | Ineos ABS/KU 2-3050 (Dry) |
|---|---|---|---|
| Tensile strain | 屈服 | ISO 527-1 | 3.2 % |
| Tensile modulus | ISO 527-1 | 1850 MPa | |
| Tensile stress | 屈服 | ISO 527-1 | 40.0 MPa |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 74.0 KJ/m |
| -30℃ | ISO 179/1eA | 16.0 KJ/m | |
| 23℃ | ISO 179/1eU | No Break KJ/m | |
| -30℃ | ISO 179/1eU | No Break KJ/m | |
| fracture strain | ISO 527-1 | >50.0 % |
| Thermal performance | Test Condition | Test Method | Ineos ABS/KU 2-3050 (Dry) |
|---|---|---|---|
| vicat | 50℃/h 50N | ISO 306 | 102 ℃ |
| Linear coefficient of thermal expansion | normal | ISO 11359-1 | 0.00012 cm/cm℃ |
| parallel | ISO 11359-1 | 0.00010 cm/cm℃ | |
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-1 | 91.0 ℃ |
| 1.80MPa，HDT | ISO 75-1 | 68.0 ℃ |
Contact Us
Get App
Top