PA6 Beetle B2-M30-16-BK9083 BIP (Oldbury) Limited
0
- Properties:Fillermineral filler30%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.38 g/cm³ | |
| Water absorption rate | ISO 62 | 1.9 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | Break | ISO 527-2 | 15 % |
| Flexural modulus | ISO 178 | 4400 MPa | |
| bending strength | ISO 178 | 100 MPa | |
| Tensile modulus | ISO 527-2 | 4800 MPa | |
| tensile strength | Break | ISO 527-2 | 55.0 MPa |
| Tensile strain | Yield | ISO 527-2 | 6.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 7.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 40 kJ/m² | |
| Impact strength of cantilever beam gap | ISO 180/A | 4.3 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+14 ohms | |
| Volume resistivity | IEC 60093 | 1E+14 ohms·cm | |
| dielectric strength | IEC 60243-1 | 10 kV/mm | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 205 °C | |
| ISO 75-2/A | 100 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top