Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 Beetle B2-M30-16-BK9083 BIP (Oldbury) Limited
--
--
Filler, mineral filler, 30%, filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | BIP (Oldbury) Limited/Beetle B2-M30-16-BK9083 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 40 kJ/m² | |
| Charpy Notched Impact Strength | ISO 179/1eA | 7.0 kJ/m² | |
| Impact strength of cantilever beam gap | ISO 180/A | 4.3 kJ/m² |
| Electrical performance | Test Condition | Test Method | BIP (Oldbury) Limited/Beetle B2-M30-16-BK9083 |
|---|---|---|---|
| dielectric strength | 3.00mm | IEC 60243-1 | 10 kV/mm |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Volume resistivity | IEC 60093 | 1E+14 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+14 ohms |
| Mechanical properties | Test Condition | Test Method | BIP (Oldbury) Limited/Beetle B2-M30-16-BK9083 |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | 15 % |
| Tensile modulus | ISO 527-2 | 4800 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 55.0 MPa |
| Tensile strain | 屈服 | ISO 527-2 | 6.0 % |
| Flexural modulus | ISO 178 | 4400 MPa | |
| bending strength | ISO 178 | 100 MPa |
| physical property | Test Condition | Test Method | BIP (Oldbury) Limited/Beetle B2-M30-16-BK9083 |
|---|---|---|---|
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 1.9 % |
| density | ISO 1183 | 1.38 g/cm³ |
| Thermal performance | Test Condition | Test Method | BIP (Oldbury) Limited/Beetle B2-M30-16-BK9083 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 205 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 100 °C |
Contact Us
Get App
Top