LCP ZENITE® 6140L
154
- Properties:High impact resistanceHigh lubrication
Compare
View PricesTechnical Data Sheet
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Thickness Tested | UL 94 | 0.75 mm | |
| Grade @ Thickness | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 135 Mpa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 80 J/m | |
| Flexural modulus | ASTM D-790 | 15600 Mpa | |
| elongation at break | ASTM D-638 | 1.3 % | |
| bending strength | ASTM D-790 | 182 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| RTI Elec | UL 746-B | 240 °C | |
| RTI Imp | UL 746-B | 130 °C | |
| Glass Transition Temperature | ASTM D-3418 | 120 °C | |
| melting temperature | ASTM D-3418 | 335 °C | |
| RTI Imp | UL 746-B | 210 °C | |
| Heat distortion temperature | ASTM D-648 | 271 °C | |
| melting temperature | 350-360 °C | ||
| RTI Imp | UL 746-B | 220 °C | |
| UL 746-B | 240 °C | ||
| Temperature range for molding | 30-95 °C | ||
| RTI Elec | UL 746-B | 240 °C | |
| drying temperature | 135 °C | ||
| RTI Imp | UL 746-B | 240 °C | |
| UL 746-B | 240 °C | ||
| RTI Elec | UL 746-B | 240 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top