Technical Data Sheet
| other | Test Condition | Test Method | Test Result |
|---|
| | | 分别为低粘度，高流量/低粘度/中粘度品级 |
| colour | | | 透明 |
| purpose | | | 注塑，薄成型，一般用途 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 15.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation | | ASTM D-638 | 120 % |
| tensile strength | | ASTM D-638 | 9100 Ibf/in |
| bending strength | | ASTM D-790 | 85 Mpa |
| bending strength | | ASTM D-790 | 870 Kgf/cm |
| Flexural modulus | | ASTM D-790 | 22000 Kgf/cm |
| tensile strength | | ASTM D-638 | 63 Mpa |
| tensile strength | | ASTM D-638 | 640 Kgf/cm |
| Flexural modulus | | ASTM D-790 | 2160 Mpa |
| Flexural modulus | | ASTM D-790 | 313000 Ibf/in |
| IZOD impact strength | | ASTM D-256 | 14.3 ft.ibf/in |
| IZOD impact strength | | ASTM D-256 | 768 J/m |
| bending strength | | ASTM D-790 | 12400 Ibf/in |
| IZOD impact strength | | ASTM D-256 | 78.4 Kgf.cm/cm |
| Izod notch impact strength | | ASTM D256/ISO 179 | 80 kg·cm/cm(J/M)ft·lb/in |
| elongation at break | | ASTM D638/ISO 527 | 120 % |
| tensile strength | | ASTM D638/ISO 527 | (62) kg/cm²(MPa)[Lb/in²] |
| Rockwell hardness | | ASTM D785 | 115 |
| bending strength | | ASTM D790/ISO 178 | (85) kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D-257 | 10 Ω.cm |
| Volume resistivity | | ASTM D257/IEC 60093 | 10^16 Ω.cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTM D-648 | 133 °C |
| Flame retardancy | | UL-94 | V-2 |
| | ASTM D648/ISO 75 | 133 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices