Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC K-30 KOTEC JAPAN
CARBO TEX
--
--
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic performance | Test Condition | Test Method | KOTEC JAPAN/K-30 |
---|---|---|---|
melt mass-flow rate | 300℃,1.2kg | ASTM D-1238 | 15.0 g/10min |
Mechanical properties | Test Condition | Test Method | KOTEC JAPAN/K-30 |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 80 kg·cm/cm(J/M)ft·lb/in | |
bending strength | ASTM D790/ISO 178 | (85) kg/cm²(MPa)[Lb/in²] | |
ASTM D-790 | 870 Kgf/cm | ||
Flexural modulus | ASTM D-790 | 2160 Mpa | |
bending strength | ASTM D-790 | 85 Mpa | |
tensile strength | ASTM D-638 | 63 Mpa | |
elongation at break | ASTM D638/ISO 527 | 120 % | |
Rockwell hardness | ASTM D785 | 115 | |
Flexural modulus | ASTM D-790 | 313000 Ibf/in | |
tensile strength | ASTM D638/ISO 527 | (62) kg/cm²(MPa)[Lb/in²] | |
Impact strength of cantilever beam gap | 23℃,V缺口,1/8" | ASTM D-256 | 768 J/m |
elongation | 断裂 | ASTM D-638 | 120 % |
Flexural modulus | ASTM D-790 | 22000 Kgf/cm | |
bending strength | ASTM D-790 | 12400 Ibf/in | |
Impact strength of cantilever beam gap | 23℃,V缺口,1/8" | ASTM D-256 | 14.3 ft.ibf/in |
tensile strength | ASTM D-638 | 9100 Ibf/in | |
ASTM D-638 | 640 Kgf/cm | ||
Impact strength of cantilever beam gap | 23℃,V缺口,1/8" | ASTM D-256 | 78.4 Kgf.cm/cm |
Electrical performance | Test Condition | Test Method | KOTEC JAPAN/K-30 |
---|---|---|---|
Volume resistivity | ASTM D-257 | 10 Ω.cm | |
ASTM D257/IEC 60093 | 10^16 Ω.cm |
other | Test Condition | Test Method | KOTEC JAPAN/K-30 |
---|---|---|---|
characteristic | 分别为低粘度.高流量/低粘度/中粘度品级 | ||
Color | 透明 | ||
purpose | 注塑.薄成型.一般用途 |
Physical properties | Test Condition | Test Method | KOTEC JAPAN/K-30 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.2 |
Thermal performance | Test Condition | Test Method | KOTEC JAPAN/K-30 |
---|---|---|---|
Heat distortion temperature | HDT | ASTM D648/ISO 75 | 133 ℃(℉) |
18.6Kg/cm,HDT | ASTM D-648 | 133 °C | |
UL flame retardant rating | UL -94 | V-2 |
Contact Us
Get App
Top