PBT 2000
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.31 g/cm | |
| melt mass-flow rate | ISO 1133 | 14 cm | |
| Shrinkage rate | ISO 294-4 | 1.6 % | |
| Water absorption rate | ISO 62 | 0.45 % |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ISO 4589-2 | 23 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 7 KJ/m | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 300 KJ/m | |
| ISO 179/1eU | No Break KJ/m | ||
| Shore hardness | ISO 868 | 77 D | |
| Tensile modulus | ISO 527-2 | 2600 MPa | |
| tensile strength | ISO 527-2 | 55 MPa | |
| Tensile strain | ISO 527-2 | 7 % | |
| Charpy Notched Impact Strength | ISO 179/1eA | 6 KJ/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+13 Ohms | |
| Volume resistivity | IEC 60093 | 1E+15 Ohm.cm | |
| dielectric strength | IEC 60243-1 | 27 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 150 ℃ | |
| ISO 75-2/A | 55 ℃ | ||
| UL flame retardant rating | UL94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top