Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT 2000 Vietnam PMPC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | Vietnam PMPC/2000 |
|---|---|---|---|
| Limiting Oxygen Index | ISO 4589-2 | 23 % |
| Mechanical properties | Test Condition | Test Method | Vietnam PMPC/2000 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23℃ | ISO 179/1eU | No Break KJ/m |
| Tensile modulus | ISO 527-2 | 2600 MPa | |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 7 KJ/m |
| Tensile strain | 屈服 | ISO 527-2 | 7 % |
| Charpy Notched Impact Strength | -30℃ | ISO 179/1eA | 6 KJ/m |
| tensile strength | 屈服 | ISO 527-2 | 55 MPa |
| Impact strength of simply supported beam without notch | -30℃ | ISO 179/1eU | 300 KJ/m |
| Shore hardness | ISO 868 | 77 D |
| Electrical performance | Test Condition | Test Method | Vietnam PMPC/2000 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 27 KV/mm | |
| Surface Resistivity | IEC 60093 | 1E+13 Ohms | |
| Volume resistivity | IEC 60093 | 1E+15 Ohm.cm |
| physical property | Test Condition | Test Method | Vietnam PMPC/2000 |
|---|---|---|---|
| Water absorption rate | ISO 62 | 0.45 % | |
| Shrinkage rate | ISO 294-4 | 1.6 % | |
| density | ISO 1183 | 1.31 g/cm | |
| melt mass-flow rate | ISO 1133 | 14 cm |
| Thermal performance | Test Condition | Test Method | Vietnam PMPC/2000 |
|---|---|---|---|
| Heat distortion temperature | 0.45 Mpa，未退火，HDT | ISO 75-2/B | 150 ℃ |
| 1.8 Mpa，未退火，HDT | ISO 75-2/A | 55 ℃ | |
| UL flame retardant rating | UL94 | HB |
Contact Us
Get App
Top